Subtotal:$0.00
ACDelco 337-1034 - Starter
- BrandACDelco
- ManufacturerACDelco
- MPN337-1034
- FeaturesCase Grounding : Grounded Case
FAQ - Answer 3 : Is the solenoid included?
FAQ - Answer 4 : Can I be assured that the unit will last, especially in extreme weather?
FAQ - Answer 5 : Do I always need a starter shim?
FAQ - Question 4 : Yes. It is included where the design of the starter requires a solenoid.
FAQ - Question 5 : Yes. These starters are designed to withstand a wide range of weather conditions.
FAQ - Question 6 : No. However a shim may be required at the starter's mounting surface to align the starter, so the starter drive makes appropriate contact with the flywheel.
Family : Permanent Magnet Planetary Gear Reduction
Features & Benefits - Bullet 1 : NEW units are manufactured under the guidelines of ISO Quality Standards to ensure consistent quality
Features & Benefits - Bullet 2 : All components are 100% NEW to provide improved performance
Features & Benefits - Bullet 3 : Engineering enhancements to internal components provide the latest, most efficient unit for your vehicle
Features & Benefits - Bullet 4 : Key components are greased to ensure long term reliability in harsh conditions
Features & Benefits - Bullet 5 : All dimensions, key mounting surfaces, and contact points are gauged and measured to ensure proper fit
Features & Benefits - Bullet 6 : Computer tested for solenoid contact life, coil balance, and pull strength, and the drive gears/clutches are assembled under tight specifications for even greater peace of mind
Features & Benefits - Bullet 7 : Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Features & Benefits - Bullet 8 : Premium aftermarket replacement part
Features & Benefits - Bullet 9 : Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Good Maintenance Practices - Section 1 - Bullet 6 : Check electrical connections, making sure they are kept clean.
Good Maintenance Practices - Section 1 - Bullet 7 : Make sure all connections to the battery are firmly attached and in good condition.
Good Maintenance Practices - Section 1 - Bullet 8 : Keeping all connections clean and tight will make sure your starter will crank with full power.
Good Maintenance Practices - Section 1 - Bullet 9 : It is very important to try and keep the starter area clean from leaking car fluids or any other debris that may be near it.
Height (in) : 5.8
Length (in) : 12.7
Meets or Exceeds Original Equipment Manufacture Specifications : Yes
Mounting Bolt Hole Quantity : 2
Mounting Flange to End of Case : 145
Mounting Flange to Pinion End at Rest : 34.0
Mounting Hardware Included : No
Mounting Shims Included : No
Nose Cone Material : Aluminum
Nose Cone Type : Closed Nose
Power Rating : 1.7
Power Rating : 2.0
Product Description : ACDelco Gold (Professional) NEW Starters are the high quality alternative to Original Equipment (OE) parts. Key components are lubricated to help ensure improved performance and long life reliability even in the toughest conditions. Starters have solenoids that are computer tested for contact life, coil balance, and pull strength, drive gears/clutches assembled under tight specifications for even greater peace of mind. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. âš WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Programming Required : No
Re-Clockable Flange : No
Signs of Wear & Troubleshooting - Section 1 - Bullet 5 : Indicators that there could be a problem with your vehicle's starter are:
Signs of Wear & Troubleshooting - Section 1 - Bullet 6 : Engine will not crank
Signs of Wear & Troubleshooting - Section 1 - Bullet 7 : Engine cranks slowly
Signs of Wear & Troubleshooting - Section 1 - Bullet 8 : Clunking/grinding noise when starting engine
Signs of Wear & Troubleshooting - Section 1 - Bullet 9 : Starter will not engage
Signs of Wear & Troubleshooting - Section 2 - Bullet 5 : Other vehicle parts that might cause related starter problems include:
Signs of Wear & Troubleshooting - Section 2 - Bullet 6 : Electrical fault
Signs of Wear & Troubleshooting - Section 2 - Bullet 7 : Loose mounting bolts
Signs of Wear & Troubleshooting - Section 2 - Bullet 8 : Sticking starter drive
Signs of Wear & Troubleshooting - Section 2 - Bullet 9 : Damage to flywheel
Solenoid Attached : Yes
Starter Rotation : Clockwise
Tooth Quantity : 9
Voltage : 12
Voltage : 12 VDC
Weight (lb) : 7
Width (in) : 7.2 - EAN00707773939062
- Cross Reference Numbers3371034
- Part TypeStarter
- Fitment
- Fitment TypeVehicle Specific
| Year | Make | Model | Submodel | Notes |
|---|---|---|---|---|
| 2003 | Honda | Accord | DX (2.4 L4 GAS) | Transmission Control: Automatic, Notes: Upgrade Replacement Design (Different Appearance) |
| 2003 | Honda | Accord | EX (2.4 L4 GAS) | Transmission Control: Automatic, Notes: Upgrade Replacement Design (Different Appearance) |
| 2003 | Honda | Accord | LX (2.4 L4 GAS) | Transmission Control: Automatic, Notes: Upgrade Replacement Design (Different Appearance) |
| 2003 | Honda | Element | DX (2.4 L4 GAS) | Transmission Control: Automatic, Notes: Upgrade Replacement Design (Different Appearance) |
| 2003 | Honda | Element | EX (2.4 L4 GAS) | Transmission Control: Automatic, Notes: Upgrade Replacement Design (Different Appearance) |
| 2004 | Honda | Accord | DX (2.4 L4 GAS) | Transmission Control: Automatic, Notes: Upgrade Replacement Design (Different Appearance) |
| 2004 | Honda | Accord | EX (2.4 L4 GAS) | Transmission Control: Automatic, Notes: Upgrade Replacement Design (Different Appearance) |
| 2004 | Honda | Accord | LX (2.4 L4 GAS) | Transmission Control: Automatic, Notes: Upgrade Replacement Design (Different Appearance) |
| 2004 | Honda | Element | DX (2.4 L4 GAS) | Transmission Control: Automatic, Notes: Upgrade Replacement Design (Different Appearance) |
| 2004 | Honda | Element | EX (2.4 L4 GAS) | Transmission Control: Automatic, Notes: Upgrade Replacement Design (Different Appearance) |
| 2004 | Honda | Element | LX (2.4 L4 GAS) | Transmission Control: Automatic, Notes: Upgrade Replacement Design (Different Appearance) |
| 2004 | Acura | TSX | Base (2.4 L4 GAS) | Notes: Upgrade Replacement Design (Different Appearance) |
| 2005 | Honda | Accord | DX (2.4 L4 GAS) | Transmission Control: Automatic, Notes: Upgrade Replacement Design (Different Appearance) |
| 2005 | Honda | Accord | EX (2.4 L4 GAS) | Transmission Control: Automatic, Notes: Upgrade Replacement Design (Different Appearance) |
| 2005 | Honda | Accord | LX (2.4 L4 GAS) | Transmission Control: Automatic, Notes: Upgrade Replacement Design (Different Appearance) |
| 2005 | Honda | Accord | SE (2.4 L4 GAS) | Transmission Control: Automatic, Notes: Upgrade Replacement Design (Different Appearance) |
| 2005 | Honda | Element | EX (2.4 L4 GAS) | Transmission Control: Automatic, Notes: Upgrade Replacement Design (Different Appearance) |
| 2005 | Honda | Element | LX (2.4 L4 GAS) | Transmission Control: Automatic, Notes: Upgrade Replacement Design (Different Appearance) |
| 2005 | Acura | TSX | Base (2.4 L4 GAS) | Notes: Upgrade Replacement Design (Different Appearance) |
| 2006 | Honda | Element | EX (2.4 L4 GAS) | Transmission Control: Automatic, Notes: Upgrade Replacement Design (Different Appearance) |
| 2006 | Honda | Element | LX (2.4 L4 GAS) | Transmission Control: Automatic, Notes: Upgrade Replacement Design (Different Appearance) |
Warranty Overview
At Newparts, we stand behind the quality of the products we sell. Every part we offer is backed by a warranty designed to give you peace of mind and protect your investment.
Standard Warranty – Most Parts
Coverage: 2 years or 24,000 miles (whichever comes first) from purchase date.
Protection: Defects in materials or workmanship under normal personal use.
Eligibility: Applies only to the original purchaser and the vehicle where the part was first installed.
Exclusions:
Wear-and-tear items (brake pads, filters, bulbs, wipers, etc.)
Commercial, fleet, rideshare, off-road, or racing use
Improper installation, misuse, accidents, or modifications
Not Covered: Labor, shipping, towing, or incidental costs.
Bison Performance Warranty – Our House Brand
Coverage: Limited Lifetime Warranty for as long as you own your vehicle.
Applies To: All products sold under the Bison Performance label.
Premium Protection: Goes beyond our standard warranty — if it’s a Bison product, the 2-year/24k mile limit is replaced with lifetime coverage.
Exclusions: Same as the standard warranty (normal wear, commercial use, improper installation, etc.).
What’s Included: Replacement of the defective product (labor and shipping excluded).
Warranty Claim Requirements
To keep claims fast and fair, we require:
Proof of purchase (invoice or order confirmation).
Photos or videos showing the defective part, order number, date, VIN, and odometer reading.
Diagnostic reports or part returns for non-visible issues may be requested.
Claims must be truthful, properly documented, and reflect normal consumer use.
Buy With Confidence: We back our products because we believe in their quality, with a transparent, customer-first warranty process you can trust. And with Bison Performance products, you’ll enjoy Limited Lifetime protection—an assurance few brands can match.
For full details and exclusions, please see our complete Warranty Terms & Conditions.
This summary is for convenience only. For full warranty coverage details, exclusions, and requirements, see our official Warranty Terms & Conditions. In case of conflict, the full policy governs.
Return Policy Overview
Most parts can be returned within 30 days of delivery if unused, uninstalled, and in original packaging.
To start a return, use our Return Portal or contact support.
Restocking fee: Up to 20% may apply for certain orders (buyer’s remorse, order errors, or special-order items)
Refunds: Issued to your original payment method within 3–5 business days after inspection
Exchanges: Not automatic — please return and reorder
Replacements: May be approved for incorrect or defective items reported within 7 days
Not returnable:
Used or installed parts
Electrical components
Opened filter kits, gaskets, or contaminated items
Final sale or custom orders
Important Notes:
Return shipping is your responsibility unless we made a verified error
Fitment is the customer’s responsibility (we can assist, but do not guarantee)
Country of origin may vary and is not grounds for return
For complete details, please see our full Return Policy.
This Returns summary is provided for convenience only. All returns, refunds, and exchanges are subject to the complete Returns Policy. In the event of any conflict, the full policy governs.
Fast, Reliable Shipping — Straight to Your Door
We ship most orders the same day when placed before 2 PM CST (Monday–Friday). Our main warehouse is just east of Nashville, TN, and we also ship from multiple locations nationwide to get your order to you as quickly as possible.
We use trusted carriers like UPS, FedEx, and USPS.
Tracking info is emailed to you as soon as your order ships.
Delivery estimates at checkout are based on carrier data, but not guaranteed.
Need help with a shipment?
If your order is missing, damaged, or incorrect, just let us know within 5 days of delivery. We’ll walk you through the quick claim process — including a few photos to help us make things right.
For full details, please see our complete Shipping Policy.
This Shipping summary is provided for convenience only. Delivery times, carrier terms, fees, restrictions, risk of loss, and other details are governed by our complete Shipping Policy. In the event of any conflict, the full policy governs.










